Infrared Motion Detector
This infrared motion detector alarm sounds an 80 db alarm whenever someone comes
within the range of the infrared zone. The zone detection coverage is 80
degrees horizontally out to 8 meters and 20 degrees vertically. 30 second
delay allows you to move out of the way before the alarm or chime becomes
activated.
Alarm Mode
- It works by means of Passive Infrared motion sensor which detects
a moving human body within a range of 8 meters x 80 degrees.
- The alarm sounds automatically when any human body approaches the
detected zone. 20 degree vertical coverage allows you to position the
alarm so pets will not set off alarm.
- A siren will sound for one minute then shut off automatically and reset
itself.
Visitor Chime Mode
- A pleasant "Ding Dong" melody sounds automatically to greet
your visitor when they approach the detected zone.
Uses 3 "AA" batteries, not included. LED indicator on face of infrared
sensor alarm lights up when batteries are low and need replacing.
Installation
- Mount the adjustable angle wall mount bracket in the desired
location with screw and screw anchor (provided).
- Adjust the Mini Alert alarm to the desired detection direction and
hold it in position by tightening the screw at the bracket.
This infrared
motion sensor alarm works great for announcing vistors to your home
or to protect certain areas from intruders. The loud, motion activated
alarm alerts you whenever someone breaks into the detection zone.
Use at home or use at the office.
|